Flame Fix® TG3 is a safe and user friendly product specially developed for flame reducing impregnating of wood, for outside (all weather conditions) use. Flame Fix® TG3 has a weather resistant coating, that provides that the treated wood looses it’s fire resistant capacity. After impregnating, these materials will do to IS 6940 & 6941 and the new European (NEN) norm 1101 & 1102.
Flame Fix® TG3 can be applied with a spray device with a pressure between 3 and 5 bars. A flower spray with a pump system or tricker mechanism will do fine. The product needs to be sprayed finely over the material with an average distance of about 20 centimeters from the object. After proper treatment the material should be moist. We recommend that after the treatment, the material should dry in a hanging position.
The material can’t be painted or coated and must be cleaned before being treated.
For proper treatment 1 ltr Flame Fix® TG3 should be enough for 2 till 4 m2 wood (nevertheless this depends on the thickness and the type of wood). With some types of wood it is necessary to treat the wood two times. Our advice is to take a small piece of the material as a sample, to get an idea of the desired result. After the fire resistant treatment with Flame Fix® TG3, it is not necessary to paint ore coat the wood.
Flame Fix® TG3 is a ready to use product and can’t be thinned. Also this product is soluble in water. This means that whenever the treated product comes in contact with water the material needs to be treated again.
We deliver Flame Fix® TG3 in cans from 10 ltr or 25 ltr and drums from 60 or 200 ltr.
For big projects we’ll gladly make a properly offer for the treatment on location by one of our dealers. When the treatment is performed by one of our dealers you will receive a signed Certificate of Treatment to present to Fire department, Community or Insurance companies.